December 2026
Welcome to The Neutral Zone.
Film that clings to itself. Dust on parts you just cleaned. Jams that โarenโt mechanical.โ If any of that sounds familiar, youโre in the right place.
Four times a year, weโll share practical, no-fluff ways to get static and contamination off your line. For our first issue, weโve gathered this yearโs most-read articles in one place, so you can jump straight to the problem youโre fighting.
Featured Story
2,500 โ 4,000
units a shift. Same crew. Same line.
Is Your Line Slower Than It Should Be?
Once the static was neutralized at the source, the throughput this customer had already paid for finally showed up. See the four โstatic taxesโ you may be paying without knowing it.
Read the full story โFree Quarterly Newsletter
Get The Neutral Zone in your inbox
Practical fixes for static and contamination. Four times a year. No fluff.
Also in This Issue
The Reject Bin Nobody Talks About
Failed seals, mislabeled cartons, film that jams the former. Often the real culprit is static, and itโs one of the most fixable problems on your floor.
Read more โ
Managing Static on High-Speed Packaging Lines
Faster lines mean more friction, and more friction means more static. Why those jams usually arenโt mechanical.
Read more โ
Contamination Control in the Medical Device Industry
One particle in the wrong place can mean a rejected lot or a failed audit. Where contamination really comes from.
Read more โ
Static Control Is a Quality Assurance Tool
Defects that seem random often have an electrostatic root cause. Why static belongs in your QA program.
Read more โ
Static Doesnโt Follow Your Gowning Protocol
You built a cleanroom to keep contamination out. Charged surfaces pull it right back in.
Read more โ
Why โBlow-Off and Hopeโ Isnโt a Plan
Your particles arenโt leaving. Theyโre relocating. The fix: neutralize, direct, capture.
Read more โ
Blowing Air at a Problem Isnโt Solving It
How ionization and managed airflow work together to remove contamination for good.
Read more โ
Reducing Static-Driven Particle Defects
Higher scrap, failed inspections, contamination nobody can explain. What static is really costing you.
Read more โ
Reducing Particle Attraction at the Source
Inspection catches problems late. This one looks upstream, at why particles cling to devices, trays and tooling.
Read more โStatic Myth vs. Fact
Myth: A blast of compressed air cleans the part.
Fact: If the part is still charged, air just moves the particles around, and the charge pulls them right back. Neutralize first, then remove and capture.
Bring us your problem part.
Tell us whatโs clinging, jamming or getting rejected. Our engineers will help you find where the charge starts and how to stop it.
Talk to an engineeror call 781-229-7799
Looking for more? Browse all Static Clean technical articles โ
