Description
The smallest available 24V DC Static Eliminator Bar. Short, powerful & compact, with built-in electronics and all the benefits of high output of modern 24V DC Bars.
The smallest available 24V DC Static Eliminator Bar. Short, powerful & compact, with built-in electronics and all the benefits of high output of modern 24V DC Bars.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at TechSales@StaticClean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
The smallest available 24V DC Static Eliminator Bar. Short, powerful & compact, with built-in electronics and all the benefits of high output of modern 24V DC Bars.
Length | 150mm, 200mm |
---|
The TSN75E 7.5kV Power Supply has been replaced by the TSN75A 7.5kV Power Supply. The newer model is a current-limited transformer based AC voltage source with resistively-damped output coupling which provides enhanced load (i.e. ionizing apparatus or Applicator) regulation.
Please review the TSN75A product pages for more information: TSN75A.
The Static H-0110 Honestmeter is an instrument designed to measure the attenuation of static electricity, and is an ideal device for measuring the diffusibility of static in materials. This unit is used to charge the sample by irritating it with air ions generated by corona discharge, and after charge deposition, it can measure the static decay curve. Since air ions are generated by the corona discharge method with AC, the sample under test can be charged with either positive or negative ions.
Since air ions are generated by the corona discharge method are used to irritate the sample to charge it, selecting the polarity and the applied voltage for the corona discharge enables the sample to be charged with both negative and positive ions.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
TheDC-ESR-C Eliminostat Ionizer Bar is a linear ionizing bar that uses the corona discharge method to generate ions. With its low dust emission design, this device is suitable for controlling static in the clean room and inside of laminar flow workstations. Since a small DC power supply is incorporated in the body of the linear bar, only a small power supply is required at the wall outlet. The safety design of the unit uses only low-voltage wiring, unlike other devices that requires a high voltage power supply and cables.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
VQM5003, VQM5005 & VQM5012 WebVAC Dust Collector with HEPA, 3/4 HP, 300 CFM w/1 – 3″ inlet collar w/ screws; pre-wired motor starter w/ 6ft cord for plug & play; 115v 60HZ, single phase unit, 30 sq. ft. cotton sateen filter, and left side air exhaust.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
SUBSCRIBE FOR NEWSLETTER