Description
The BR6200 self-ionizing static dischargers are highly efficient anti-static tools which are used on countless machines processing sheets and webs.
The BR6200 self-ionizing static dischargers are highly efficient anti-static tools which are used on countless machines processing sheets and webs.
The BR62 Static Brush Bars come in 18mm Carbon Fiber (BR62-C) and 18mm Nylon Fiber (BR62-N).
*The BR6200 is available in any length from 100 mm to 2700 mm.
It has an aluminum body with 2 mm wall thickness.
The “brushes” have a large number of highly conductive fibers. The fine tips of the fibers concentrate the electric field of the static charge and ionize the air. This ionized air provides ions of the opposite polarity to neutralize the static charge and allows it to flow to earth through the brush body.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
The BR6200 self-ionizing static dischargers are highly efficient anti-static tools which are used on countless machines processing sheets and webs.
The AP-5 Ionizing Air Nozzle is a highly efficient static eliminator, producing a stream of ionized compressed air to neutralize static on surfaces and effectively blow-off particles.
The Hurricane 300 Ionizing Air Blower has been upgraded. The new version is the Hurricane 300B Balanced Ionizing Blower.
Please review the following pages for details of the new upgraded version:
TheDC-ESR-C Eliminostat Ionizer Bar is a linear ionizing bar that uses the corona discharge method to generate ions. With its low dust emission design, this device is suitable for controlling static in the clean room and inside of laminar flow workstations. Since a small DC power supply is incorporated in the body of the linear bar, only a small power supply is required at the wall outlet. The safety design of the unit uses only low-voltage wiring, unlike other devices that requires a high voltage power supply and cables.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
VQM5003, VQM5005 & VQM5012 WebVAC Dust Collector with HEPA, 3/4 HP, 300 CFM w/1 – 3″ inlet collar w/ screws; pre-wired motor starter w/ 6ft cord for plug & play; 115v 60HZ, single phase unit, 30 sq. ft. cotton sateen filter, and left side air exhaust.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
SUBSCRIBE FOR NEWSLETTER