Description
The smallest available 24V DC Static Eliminator Bar. Short, powerful & compact, with built-in electronics and all the benefits of high output of modern 24V DC Bars.
The smallest available 24V DC Static Eliminator Bar. Short, powerful & compact, with built-in electronics and all the benefits of high output of modern 24V DC Bars.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at TechSales@StaticClean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
The smallest available 24V DC Static Eliminator Bar. Short, powerful & compact, with built-in electronics and all the benefits of high output of modern 24V DC Bars.
Length | 150mm, 200mm |
---|
The TSN75E 7.5kV Power Supply has been replaced by the TSN75A 7.5kV Power Supply. The newer model is a current-limited transformer based AC voltage source with resistively-damped output coupling which provides enhanced load (i.e. ionizing apparatus or Applicator) regulation.
Please review the TSN75A product pages for more information: TSN75A.
VQM5003, VQM5005 & VQM5012 WebVAC Dust Collector with HEPA, 3/4 HP, 300 CFM w/1 – 3″ inlet collar w/ screws; pre-wired motor starter w/ 6ft cord for plug & play; 115v 60HZ, single phase unit, 30 sq. ft. cotton sateen filter, and left side air exhaust.
Because some of our products are made in various sizes, part numbers and pricing will vary. Please contact us at techsales@staticclean.com or click the “Request a Quote” button below. We look forward to serving your static control and/or contamination control needs.
The SBTI Sentinel Benchtop Ionizer has been replaced by the Sentinel II Benchtop Ionizing Blower.
Please see the details of the Sentinel II on this product page:
The Winstat BF-X2ZB-V2 Benchtop ionizer is a small profile, lightweight unit that removes static in a wide range of applications especially in the Electronics and Medical Device Manufacturing Process. The BF-X2ZB-V2 blower can be placed on a workbench, or it can also be used as a process tool and mounted above a conveyor line, or in a tight production area to effectively remove static charges wherever ESD material-handling problems occur.
SUBSCRIBE FOR NEWSLETTER